Welcome toChangzhou No.2 Drying Equipment Factory Co., Ltd.

Changzhou No.2 Drying Equipment Factory Co., Ltd.

13801507125

Service hotline: 138-0150-7125

  • Selection
  • Technical
  • discount

www.9778.com

Wzh weightless two axis blade mixer

Location : Home > Product > Mixing equipment
  • Wzh weightless two axis blade mixer
  • Wzh weightless two axis blade mixer
  • Wzh weightless two axis blade mixer
  • Wzh weightless two axis blade mixer
  • Wzh weightless two axis blade mixer
  • Wzh weightless two axis blade mixer
  • < >
    • Wzh weightless two axis blade mixer
    • Wzh weightless two axis blade mixer
    • Wzh weightless two axis blade mixer
    • Wzh weightless two axis blade mixer
    • Wzh weightless two axis blade mixer
    • Wzh weightless two axis blade mixer
    Wzh weightless two axis blade mixer
    Keywords:WZH无重力双轴浆叶混合机,无重力双轴浆叶混合机,无重力混合机
    Product Brief:The non gravity two axis paddle mixer has the characteristics of strong and high efficiency, short mixing time and high mixing uniformity. The two agi...
    138-0150-7125
    Consultation +

    S

    UMMARIZE SUMMARY

    Reliable supplier of drying equipment users

    The non gravity two axis paddle mixer has the characteristics of strong and high efficiency, short mixing time and high mixing uniformity. The two agitating shafts in the horizontal shell rotate in the same speed and reverse direction, and the paddles arranged at special angles on the shaft ensure the radial, circumferential and axial three-way throwing movement of materials, forming a compound cycle, and achieving uniform mixing in a very short time.

    WZH?? é????????è?????????··??????

    WZH?? é????????è?????????··??????

    P

    ARAMETER PARAMETER

    Reliable supplier of drying equipment users

    Item / modelFull volume(m3)Loading coefficientpower(kw)size(mm)
    weight(kg)
    WZH-0.50.050.4-0.61.51290×660×837230
    WZH-0.20.20.4-0.641124×1110×720260
    WZH-0.40.40.4-0.641400×1250×1030450
    WZH-0.50.50.4-0.67.51450×1500×950800
    WZH-110.4-0.6111800×1800×13501150
    WZH-1.51.50.4-0.6151850×1920×11801500
    WZH-220.4-0.618.52200×2400×16002800
    WZH-2.52.50.4-0.6222300×2300×16204200
    WZH-440.4-0.6222680×2400×18504500
    WZH-550.4-0.6372950×3050×20406000
    WZH-660.4-0.6453050×3250×21007000
    WZH-10100.4-0.6553550×3150×24008000
    WZH-12120.4-0.6554695×3180×250010500
    WZH-15150.4-0.6554180×3960×260010000
    WZH-20200.4-0.6755700×3700×250013000

    Note: 1. The technical parameters in the table are based on the material proportion of 0.6.

    2. In case of vacuum, heating, pressure resistance, cooling, drying, explosion, flammability, corrosion and other process conditions, the user must clearly inform and provide accurate relevant data, which can be customized after text confirmation.

    3. Due to the diversity of equipment structure and auxiliary configuration, some of the configurations in the above description need to be selected by the user. Please select the appropriate configuration according to the physical properties and indicate it in writing when ordering. Welcome to consult our company's technical personnel to discuss the model selection.

    4. Due to the technical update, the technical parameters are subject to change without notice, and the correct parameters are subject to the material provided.


    A

    PPLICATION APPLICATION

    Reliable supplier of drying equipment users

    Widely used in pharmaceutical, food, chemical, plastic, pigment, feed, open production, metallurgy and other industries.

    Characteristic

    1. Mixing effect: for dry bulk solid or solid-liquid mixture, the mixing process is fast, large capacity and complete, without segregation, and the mixing process is fast and uniform. Even if the material proportion and particle size are quite different, the mixing effect can be achieved under the rapid and violent tossing and sprinkling of the mixing blade arranged by the cross anchor.

    2. Diversified driving modes: single chain drive, gear drive and two-way drive can be selected as required.

    3. Crushing device: when the materials are lumped, the crushing device can be increased. The "crushing rod" with triangular tooth cover can maintain a high speed of more than 1400rpm and break through the shear force generated by its high-speed operation; the soft or agglomerated materials will be crushed and depolymerized in the weightlessness area of the materials.

    4. Discharging form: generally, the discharging form is pneumatic (manual) flap valve, the arc valve is tightly embedded in the cylinder, flush with the inner wall of the cylinder, and there is no material accumulation and mixing dead angle phenomenon; the standard type has large opening and small opening, large opening to the side of the cylinder, quick discharging, clean and quick, and less residue.

    5. Two blade: in order to reduce the replacement cost of vulnerable parts of the equipment, the blade can be made into two blades, and a movable blade can be padded on the blade base to directly replace the worn blade, which is economical and quick.

    6. Clearance between blade and cylinder: the clearance between blade and cylinder wall directly affects the mixing effect and material residue in the body after discharging. The clearance between blade and cylinder of our company is controlled within 3-5mm.

    7. Jacket and spray device: users can choose jacket and spray device according to process requirements, so as to heat and cool materials or spray appropriate amount of liquid into materials.

    8. Full volume of 20 cubic meters: this series of mixers can achieve a full volume of 20 cubic meters. For large-scale equipment transmission form, mixer base, etc., they are quite different from the common specifications.

    User customization

    The following structure forms can be customized according to user requirements

    1. According to the material characteristics, add appropriate configuration, and combine into a drying and mixing integrated system. Drying by conduction heating has the advantages of high efficiency and energy saving.

    2. The simplified body can be designed in the form of a jacket, with hot and cold medium introduced to meet the user's requirements for process temperature control.

    3. It can be designed to operate under vacuum or pressure conditions.

    4. The upper cover, sealing device and discharge valve can be designed according to the user's requirements, and can be manually or pneumatically operated.

    5. High wear-resistant Teflon scraper of special material can be added on the blade of blade to effectively reduce the mixing blind area.

    6. Non standard design and manufacturing can be carried out according to the special requirements of users.


    Changzhou No.2 Drying Equipment Factory Co., Ltd.
    138-0150-7125

    Changzhou No.2 Drying Equipment Factory Co., Ltd.

    Advisory Service
    TOP
    XML 地图 | Sitemap 地图