The second drying five layer and fifty meter belt dryer is debugged successfully and ready for delivery!
Based on years of practical experience, combined with the advanced technology of similar products at home and abroad, our company develops and produces the third generation belt dryer based on the second generation DWT belt dryer. This machine overcomes the shortcomings of DWT series equipment in the actual use of some materials, makes the structure of belt dryer more perfect and reasonable, the scope of application is wider, the operation is stable and convenient, and the thermal efficiency is high. The main structural features are as follows: 1. The heat exchanger is arranged separately from the mesh belt drying chamber, and a heat exchanger chamber is arranged on the side of the drying chamber to effectively avoid the bad contact between the powder particles and the heat exchanger (such as the problem that the loss of the powder particles affects the heat exchange effect on the heat exchanger). 2. The hot air circulation mode is changed from the longitudinal multi unit series flow to the lateral unit circulation, realizing the independent circulation of each unit, forced ventilation, effectively increasing the circulating air volume, bringing many advantages, such as high penetration of hot air, high heat utilization rate, good unit controllability, etc., with high stability and high efficiency and energy saving. It is an ideal and reliable production equipment for the majority of users.